Gigabyte B760 GAMING X DDR4

• CPU

1. 1. LGA1700 socket: Support for the 13th and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors

1. 2. L3 cache varies with CPU

(Please refer "CPU Support List" for more information.)

• Chipset

1. 1. Intel® B760 Express Chipset

• Memory

1. 1. Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules

1. 2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory

1. 3. Dual channel memory architecture

1. 4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)

1. 5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

1. 6. Support for Extreme Memory Profile (XMP) memory modules

(Please refer "Memory Support List" for more information.)

• Onboard Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

1. 1. 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz
      * Support for DisplayPort 1.2 version and HDCP 2.3

1. 2. 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz
      * Support for HDMI 2.0 version and HDCP 2.3.

(Graphics specifications may vary depending on CPU support.)

• Audio

1. 1. Realtek® Audio CODEC

1. 2. High Definition Audio

1. 3. 2/4/5.1/7.1-channel

1. 4. Support for S/PDIF Out
      * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.

• LAN

1. 1. Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

• Wireless Communication module

AMD Wi-Fi 6E RZ608 (MT7921K)

1. 1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands

1. 2. BLUETOOTH 5.2

1. 3. Support for 11ax 80MHz wireless standard and up to 1.2 Gbps data rate

(Actual data rate may vary depending on environment and equipment.)

• Expansion Slots

CPU:

1. 1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x16 (PCIEX16)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

Chipset:

1. 2. 2 x PCI Express x16 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_1, PCIEX1_2)

• Storage Interface

CPU:

1. 1. 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

Chipset:

1. 2. 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2M_SB)

1. 3. 4 x SATA 6Gb/s connectors

RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

• USB

Chipset:

1. 1. 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header

1. 2. 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel

1. 3. 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 1 support

1. 4. 3 x USB 3.2 Gen 1 ports (1 port on the back panel, 2 ports available through the internal USB header)

1. 5. 1 x USB 2.0/1.1 port on the back panel

Chipset+2 USB 2.0 Hubs:

1. 6. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

• Internal I/O Connectors

1. 1. 1 x 24-pin ATX main power connector

1. 2. 1 x 8-pin ATX 12V power connector

1. 3. 1 x CPU fan header

1. 4. 1 x CPU fan/water cooling pump header

1. 5. 3 x system fan headers

1. 6. 1 x system fan/water cooling pump header

1. 7. 2 x addressable LED strip headers

1. 8. 2 x RGB LED strip headers

1. 9. 3 x M.2 Socket 3 connectors

1. 10. 4 x SATA 6Gb/s connectors

1. 11. 1 x front panel header

1. 12. 1 x front panel audio header

1. 13. 1 x S/PDIF Out header

1. 14. 1 x USB Type-C® header, with USB 3.2 Gen 2 support

1. 15. 1 x USB 3.2 Gen 1 header

1. 16. 2 x USB 2.0/1.1 headers

1. 17. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only)

1. 18. 1 x serial port header

1. 19. 1 x Q-Flash Plus button

1. 20. 1 x reset jumper

1. 21. 1 x Clear CMOS jumper

• Back Panel Connectors

1. 1. 1 x USB 3.2 Gen 2 Type-A port (red)

1. 2. 1 x USB Type-C® port, with USB 3.2 Gen 1 support

1. 3. 1 x USB 3.2 Gen 1 port

1. 4. 5 x USB 2.0/1.1 ports

1. 5. 2 x SMA antenna connectors (2T2R)

1. 6. 1 x DisplayPort

1. 7. 1 x HDMI port

1. 8. 1 x RJ-45 port

1. 9. 6 x audio jacks

• I/O Controller

1. 1. iTE® I/O Controller Chip

• H/W Monitoring

1. 1. Voltage detection

1. 2. Temperature detection

1. 3. Fan speed detection

1. 4. Water cooling flow rate detection

1. 5. Fan fail warning

1. 6. Fan speed control
      * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

• BIOS

1. 1. 1 x 256 Mbit flash

1. 2. Use of licensed AMI UEFI BIOS

1. 3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

• Unique Features

1. 1. Support for GIGABYTE Control Center (GCC)
      * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

1. 2. Support for Q-Flash

1. 3. Support for Q-Flash Plus

• Bundled Software

1. 1. Norton® Internet Security (OEM version)

1. 2. LAN bandwidth management software

• Operating System

1. 1. Support for Windows 11 64-bit

1. 2. Support for Windows 10 64-bit

• Form Factor

1. 1. ATX Form Factor; 30.5cm x 24.4cm